Tile nano protective agent

Introduction：

Tile nanometer protective agent technology parameters

A. Description:

Tile nano protection agent consists of two components, respectively named nano protection agent A fluid, nano protective agent B liquid.

2. Brick quality requirements:

1. The fresh polishing brick, no pollution, no dust on the surface of

2. Start the luminosity: 60 degrees or higher

3. Water absorption % (m/m) : 0.05 or less

4. The flatness: no turtle, sag

5. Appearance: coarse pore, macroscopic observation is less than the dense wool stoma. Brick can not meet the above requirements, still can produce pure bright polishing line, but the product performance should revise down.

3. Product parameters

1. The average:

(1) powder brick 85 or increase 25 to 30 degrees or more.

(2) the color tile 80 or 20 ~ 30 degrees or higher.

2. Brick surface hardness:

Does not increase don't reduce, almost keep ?