TX protective agent (denitration desulfurization)
Introduction：
Brief introduction:
NOXSources: one is the fuel, like coal, gas, industrial diesel oil, heavy oil, etc.The second is the combustion process of nitrogen and oxygen in the air generated under high temperature and high pressureNOX。 SO2Sources: one is the fuel.The second is blank in the pyrite(FeS2), sulfate, etc.Processing method is in industrial kiln, spray tower or boiler in suitable temperature area directly sprayed into the organic amine compound potions, denitration desulfurization effect at the same time.
|
Second, the scope of application:
Architectural ceramics kiln, spray tower, boiler flue gas NOX、SO2The place ofRichard
Features:
Appearance: light color transparent liquid
Ingredients: organic amine compound
3. Weight: 1. 1
4. The effective components: 30 + / - 1
5. Water solution:
Four, applied amount of:
According to the difference of the NOX and SO2 emissions.
Five, the operation steps:
1. Choose the 900-1000 ℃ temperature points, the rack spray gun.
2. The use of multistage pump will TX protective agent liquid spray into the high temperature furnace
The chamber.
3. Adjust the amount of liquid spray by data standard size.
Six, drug storage conditions:
Please avoid debris into the sealed tank cover, and the quality.
|
Seven, storage period:
Under the condition of complete storage, storage life can be up to 6 months.
Eight, note:
1. The potion to avoid contact with children.
2. The reagent to avoid contact with eyes, skin.If contact with eyes
Eyes, skin and use amount of top water wash.
3. Do not swallow.
4. Water, non-combustible, according to the common chemical transportation and storage.
Please conduct a comprehensive test prior to use and then to decide the most appropriate method of use
|
中文
English
Home
